blacklight special effects UVA led silicone G4 bulb 12V DC cable socket BL1P

Description

1 blacklight bulb and cable socket
DC barrel connector on the cable socket
A single special effects LED black lights for illuminating fluorescent paints, plastics, and pigments used in prop and scenery projects for themed entertainment.
Low voltage 12 volts DC with cable socket mounts into a variety of materials
Socket mounts into 7/16” hole in rigid foam wood and other similar prop and scenery materials
24 LEDs with UVA blacklight output encased in a clear silicone rubber bulb 1.5 to 2 watt nominal power, for 12 volts DC only
Cable end has 2.1mm x 5.5mm DC barrel connector, cable with socket length is 10.5” nominal.
The EEL1-SBL2-BL black lights have varied uses in building props and scenery for themed entertainment and special effects projects. These lights use 24 LEDs in the 390nm to 395nm peak wavelength ultraviolet UVA blacklight region, the LEDs are encased in a clear silicone resin bulb. The molded silicone bulbs have a nominal height of 1.1” and a nominal diameter of 0.5”. The bulbs are for 12 volts DC power sources. The bulbs are non-polarized and are a standard G4 bi-pin style. The lights when operated at 12 volts DC have a nominal power of 1.5 to 2 watt.
The bulbs are paired with a mating cable socket assembly. The EEL1 (Enhanced Effects Light) cable socket assembly has a G4 socket at one end and a standard DC barrel connector of the 2.1mm x 5.5mm size on the other. The length of the EEL1 cable socket is 10.5” and the overall length of the bulb cable socket with the bulb installed is 11.5” nominal.
The socket is designed to press fit mount into a 7/16” hole in various materials such as rigid foam or wood. The DC barrel connector end of the cable socket can pass through a 7/16” hole while the taper body of the socket end can be press fit into the hole. The taper fit of the socket body locks it into place.  The flange on the front of the socket is 5/8” diameter and limits the insertion depth.
Applications include:
Creating unique water and flame effects when used for illumination of fluorescent paints and fluorescent acrylic sheet plastics