10.3inch E-Paper E-Ink Display HAT USB/SPI/I80 For Raspberry Pi 1872×1404 Pixels

Description

This auction is for
10.3inch e-Paper HAT
10.3inch e-Paper E-Ink Display HAT for Raspberry Pi, 1872×1404 pixels, Black / White, 2-16 Grey Scales, USB/SPI/I80
10.3" e-Paper HAT
for Raspberry Pi
partial refresh support, low power, wide viewing angle, paper-like effect
Ideal for e-reader, eink monitor, industrial instruments...
Size
10.3"
Resolution
1872×1404
Viewing Angle
>170°
Display Color
Black and White
Grey Scale
2-16 (1-4 bit)
Communication
USB/SPI/I80
Display Panel
E-paper
Experience
Paper-like
Environment
Ambient Light Required
Display Type
Passively Reflective
Refreshing
Partial Refresh Support
Features at a glance
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
USB/SPI/I80 interface, for connecting with controller boards like Raspberry Pi/STM32, etc.
Comes with development resources and manual (examples for Raspberry Pi/STM32)
Specifications
operating voltage
5V
display color
black, white
interface
USB/SPI/I80
grey scale
2-16 (1-4 bit)
outline dimensions
216.70 × 174.40mm
full refresh time
<1s
display size
209.66 × 157.25mm
refresh power
1.2W (typ.)
dot pitch
0.112 × 0.112mm
standby current
0.1W (typ.)
resolution
1872 × 1404 pixels
viewing angle
>170°
Advantages of EINK
E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.
Standard Raspberry Pi 40PIN GPIO header
compatible with Raspberry Pi series boards
Raspberry Pi in the photo is NOT included.
Onboard USB/SPI/I80 control interface
for use with controller boards like Raspberry Pi/STM32
SPI pinout
VCC
Power, 5V input
GND
Ground
MISO
SPI MISO pin
MOSI
SPI MOSI pin
SCK
SPI SCK pin
CS
SPI chip selection, low active
RST
External reset, low active
HRDY
Busy status output, low active
Application examples
Suitable for price Tags, asset/equipment Tags, shelf labels, conference name tags...
Outline dimensions
Resources & Services
WIKI:
10.3inch_e-Paper_HAT
* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.
Selection Guide
Part Number
Colors
Grey Scale
Resolution
Display size (mm)
Outline Dimension (mm)
Full Refresh Time (s)
Partial Refresh
1
Pi Head-er
2
Flexi-ble
Interface
1.02inch e-Paper Module
black, white
2
128×80
21.76 × 14.00
42.0 × 27.0
2
√
SPI
1.54inch e-Paper Module
black, white
2
200×200
27.60 × 27.60
48.0 × 33.0
2
√
SPI
1.54inch e-Paper Module (B)
red, black, white
2
200×200
27.60 × 27.60
48.0 × 33.0
8
SPI
1.54inch e-Paper Module (C)
yellow, black, white
2
152×152
27.51 × 27.51
48.0 × 33.0
27
SPI
2.13inch e-Paper HAT
black, white
2
250×122
48.55 × 23.71
65.0 × 30.2
2
√
√
SPI
2.13inch e-Paper HAT (B)
red, black, white
2
212×104
48.55 × 23.71
65.0 × 30.2
15
√
SPI
2.13inch e-Paper HAT (C)
yellow, black, white
2
212×104
48.55 × 23.71
65.0 × 30.2
15
√
SPI
2.13inch e-Paper HAT (D)
black, white
2
212×104
48.55 × 23.71
59.2 × 29.2
2
√
√
√
SPI
2.66inch e-Paper Module
black, white
2
296×152
30.704 × 60.088
37.0 × 83.5
6
√
SPI
2.7inch e-Paper HAT
black, white
4
264×176
57.29 × 38.19
85.0 × 56.0
6
√
SPI
2.7inch e-Paper HAT (B)
red, black, white
2
264×176
57.29 × 38.19
85.0 × 56.0
15
√
SPI
2.9inch e-Paper Module
black, white
2
296×128
66.89 × 29.05
89.5 × 38.0
2
√
SPI
2.9inch e-Paper Module (B)
red, black, white
2
296×128
66.89 × 29.05
89.5 × 38.0
15
SPI
2.9inch e-Paper Module (C)
yellow, black, white
2
296×128
66.89 × 29.05
89.5 × 38.0
15
SPI
2.9inch e-Paper HAT (D)
black, white
2
296×128
66.90 × 29.06
79.0 × 36.7
2
√
√
√
SPI
3.7inch e-Paper HAT
black, white
4
480×280
47.32 × 81.12
58.0 × 96.5
3
√
√
SPI
4.2inch e-Paper Module
black, white
4
400×300
84.80 × 63.60
103.0 × 78.5
4
SPI
4.2inch e-Paper Module (B)
red, black, white
2
400×300
84.80 × 63.60
103.0 × 78.5
15
SPI
4.2inch e-Paper Module (C)
yellow, black, white
2
400×300
84.80 × 63.60
103.0 × 78.5
15
SPI
4.3inch e-Paper UART Module
black, white
4
800×600
88.00 × 66.00
118.0 × 75.0
1.5
UART
5.65inch e-Paper Module (F)
7-Color
2
600×448
114.9 × 85.8
138.5 × 100.5
15
SPI
5.83inch e-Paper HAT (B)
red, black, white
2
648×480
119.232 × 88.320
125.4 × 99.5
20
√
SPI
5.83inch e-Paper HAT (C)
yellow, black, white
2
600×448
118.8 × 88.26
125.4 × 99.5
26
√
SPI
6inch e-Paper HAT
black, white
16
800×600
122.4 × 90.6
138.4 × 101.8
<1
√
√
USB/SPI/
I80
6inch HD e-Paper HAT
black, white
16
1448×1072
122.4 × 90.6
138.4 × 101.8
<1
√
√
USB/SPI/
I80
7.5inch e-Paper HAT
black, white
2
800×480
163.20 × 97.92
170.2 × 111.2
5
√
SPI
7.5inch HD e-Paper HAT
black, white
2
880×528
163.24 × 97.94
170.2 × 111.2
5
√
SPI
7.5inch e-Paper HAT (B)
red, black, white
2
800×480
163.20 × 97.92
170.2 × 111.2
16
√
SPI
7.5inch HD e-Paper HAT (B)
red, black, white
2
880×528
163.24 × 97.94
170.2 × 111.2
21
√
SPI
7.5inch e-Paper HAT (C)
yellow, black, white
2
640×384
163.20 × 97.92
170.2 × 111.2
16
√
SPI
7.8inch e-Paper HAT
black, white
16
1872×1404
158.18 × 118.64
173.8 × 127.6
<1
√
√
USB/SPI/
I80
9.7inch e-Paper HAT
black, white
16
1200×825
202.8 × 139.43
218.8×156.4
<1
√
√
USB/SPI/
I80
10.3inch e-Paper HAT
black, white
16
1872×1404
209.66 × 157.25
216.7 × 174.4
<1
√
√
USB/SPI/
I80
10.3inch e-Paper HAT (D)
black, white
16
1872×1404
209.66 × 157.25
227.7 × 165.8
<1
√
√
√
USB/SPI/
I80
12.48inch e-Paper Module
black, white
2
1304×984
252.98 × 190.90
280.0 × 229.5
<8
√
SPI
12.48inch e-Paper Module (B)
red, black, white
2
1304×984
252.98 × 190.90
280.0 × 229.5
<16
√
SPI
It usually takes about 0.3s for partial refresh
Pi Header: standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
Package Contains
10.3inch e-Paper x1
e-Paper IT8951 Driver HAT (B) x1
10.3inch e-Paper Adapter x1
40PIN FFC (same side contact) x1
USB type A plug to micro B plug cable x1
PH2.0 20cm 8Pin x1
RPi screws pack (2pcs) x1
1
2+3+4
5
6
7
Terms & Conditions
Payment:
· Paypay is the only payment method we currently accept. If you want to pay by other way, please contact with us directly.
Shipping:
· All items will be shipped within 48 hours after receiving your payment.
· Please make sure your delivery details are correct,especially the Address,Zip Code and Tel Number.
· Your order will be shipped according to the service you choose, if you choose Standard Shipping, your package will be shipped by epacket/Singapore Post/Deutsche Post/SpeedPak, etc, if you choose Expedited Shipping, your package will be shipped by e-EMS, DHL, Fedex, etc. we will choose the best logistice method for you, all orders can be tracked with a tracking number.
Feedback:
· Your shopping experience is very important to us and our business. We would like to invite you to leave positive feedback on our products and service if you are satisfied with our total service as well as our products,it is also a great way to help others make purchases like yours!
·
If you are unsatisfied with any aspect of our service, please contact us first so we can try to resolve your problem.
Others:
· Any question, you are always welcome to contact with us directly, we will reply you asap.